Home
Hygienic fittings DIN EN 10357-A

Hygienic fittings DIN EN 10357-A

1522 products

{"zero"=>"No products", "one"=>"Showing {{offset}} - {{page_size}} of {{count}} product", "other"=>"Showing {{offset}} - {{page_size}} of {{count}} products"}

Alfa Laval Hygienic fittings DIN EN 10357-A are made of stainless steel 316L (1.4404), 304L (1.4307), 304 (1.4301) and have internal surface finish roughness average (Ra) ≤ 0.8 μm.

DIN-EN 10374-A (formerly DIN 11850) aligns with the following standards, ensuring compatibility and compliance in hygienic and aseptic applications:

DIN 11852: Standard for welded connections, including bends, tees, reducers and tubular fittings
DIN 11851: Standard for hygienic unions used with SS tubes ( Expanding or welding connections)
DIN 11853: Standard for hygienic clamp, flange, and threaded connections
DIN 32676: Standard for tri-clamp unions. Clamp connections facilitate quick assembly and disassembly of tubing systems
DIN 11864: Standard for aseptic connections with long weld ends (for orbital weld), pharmaceutical range.

Alfa Laval Hygienic fittings DIN EN 10357-A range includes:

Bends 45°, 90°
Clamp rings
Connections: nuts, clamp unions, flange unions, threaded unions, threaded expanding unions
End caps
Tri-clamp ferrules, weld ferrules, short or long
Flanges with weld ends
Reducers: weld on concentric or eccentric reducers
Gaskets: O-rings DN10-DN150
Tees: equal tees, reduced tees long or short, short tees with weld ends.

O-rings DIN EN 10357-A material:

EPDM
FPM
NBR
PTFE (G)
Silicone (Q).

The ID/OD dimensions of this hygienic fittings range comply with the stainless steel tube standard EN 10357-A.

Filters

alsis_code__5035, dimension_a__52.7, dimension_b__5.5, dimension_d__32.2, filter_1__["Gasket"], filter_2__["D"], filter_3__["DIN 32676"], filter_4__["EPDM (E)"], filter_5__["DN32"], filter_8__["Seal"], lead_time__On request, source_name__GASKET D DN32 EPDM - DIN 32676, stock_code__NI , alsis_code__5035, customs_statistical_number__73072390, dimension_a__52.7, dimension_b__5.5, dimension_d__38.2, filter_1__["Gasket"], filter_2__["D"], filter_3__["DIN 32676"], filter_4__["EPDM (E)"], filter_5__["DN40"], filter_8__["Seal"], lead_time__On request, source_name__GASKET D DN40 EPDM - DIN 32676, stock_code__NI , alsis_code__5007, dimension_l__340, dimension_l2__40, dimension_r__300, filter_1__["Bends 90"], filter_2__["BL"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN200"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__204.00/200.00 x 2.00, source_name__BEND 90 BL DN200 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5035, customs_statistical_number__73072390, dimension_a__93.2, dimension_b__5.5, dimension_d__66.2, filter_1__["Gasket"], filter_2__["D"], filter_3__["DIN 32676"], filter_4__["EPDM (E)"], filter_5__["DN65"], filter_8__["Seal"], lead_time__On request, price_without_login__{"amount":"100.0","currency_code":"EUR"}, source_name__GASKET D DN65 EPDM - DIN 32676, stock_code__NI , alsis_code__5035, customs_statistical_number__73072390, dimension_a__36.2, dimension_b__5.5, dimension_d__10.2, filter_1__["Gasket"], filter_2__["D"], filter_3__["DIN 32676"], filter_4__["EPDM (E)"], filter_5__["DN10"], filter_8__["Seal"], lead_time__On request, source_name__GASKET D DN10 EPDM - DIN 32676, stock_code__NI , alsis_code__5035, customs_statistical_number__73072390, dimension_a__36.2, dimension_b__5.5, dimension_d__16.2, filter_1__["Gasket"], filter_2__["D"], filter_3__["DIN 32676"], filter_4__["EPDM (E)"], filter_5__["DN15"], filter_8__["Seal"], lead_time__On request, source_name__GASKET D DN15 EPDM - DIN 32676, stock_code__NI , alsis_code__5035, dimension_a__36.2, dimension_b__5.5, dimension_d__20.2, filter_1__["Gasket"], filter_2__["D"], filter_3__["DIN 32676"], filter_4__["EPDM (E)"], filter_5__["DN20"], filter_8__["Seal"], lead_time__On request, source_name__GASKET D DN20 EPDM - DIN 32676, stock_code__NI , alsis_code__5035, dimension_a__52.7, dimension_b__5.5, dimension_d__26.2, filter_1__["Gasket"], filter_2__["D"], filter_3__["DIN 32676"], filter_4__["EPDM (E)"], filter_5__["DN25"], filter_8__["Seal"], lead_time__On request, source_name__GASKET D DN25 EPDM - DIN 32676, stock_code__NI , alsis_code__5035, customs_statistical_number__73072390, dimension_a__66.2, dimension_b__5.5, dimension_d__50.2, filter_1__["Gasket"], filter_2__["D"], filter_3__["DIN 32676"], filter_4__["EPDM (E)"], filter_5__["DN50"], filter_8__["Seal"], lead_time__On request, source_name__GASKET D DN50 EPDM - DIN 32676, stock_code__NI , alsis_code__5035, customs_statistical_number__73072390, dimension_a__108.2, dimension_b__5.5, dimension_d__81.2, filter_1__["Gasket"], filter_2__["D"], filter_3__["DIN 32676"], filter_4__["EPDM (E)"], filter_5__["DN80"], filter_8__["Seal"], lead_time__On request, source_name__GASKET D DN80 EPDM - DIN 32676, stock_code__NI , alsis_code__5035, customs_statistical_number__73072390, dimension_a__121.2, dimension_b__5.5, dimension_d__100.2, filter_1__["Gasket"], filter_2__["D"], filter_3__["DIN 32676"], filter_4__["EPDM (E)"], filter_5__["DN100"], filter_8__["Seal"], lead_time__On request, source_name__GASKET D DN100 EPDM - DIN 32676, stock_code__NI , alsis_code__5060, customs_statistical_number__73072390, filter_1__["Bolt and nut set"], filter_2__["Screw and Nut set"], filter_3__["DIN 11864-2/11853-2"], filter_4__["1.4301 (304)"], filter_5__["DN76.1"], lead_time__On request, source_name__SCREW AND NUT SET DN76.1 - DIN 11864-2/11853-2, stock_code__NI , alsis_code__5049, customs_statistical_number__73072390, dimension_a__109.5, filter_1__["Clamp ring"], filter_2__["CR WN DIN"], filter_3__["Fit to DIN"], filter_4__["304"], filter_5__["DN80"], filter_8__["Clamp ends"], lead_time__3-5 days, source_name__CLAMP RING DN80-304, stock_code__SI , alsis_code__5049, customs_statistical_number__73072390, dimension_a__187, filter_1__["Clamp ring"], filter_2__["CR WN 2HINGE"], filter_3__["Fit to DIN"], filter_4__["304"], filter_5__["DN150"], filter_8__["Clamp ends"], lead_time__3-5 days, source_name__CLAMP RING DN150-304, stock_code__SI , alsis_code__5049, customs_statistical_number__73072390, dimension_a__159, filter_1__["Clamp ring"], filter_2__["CR WN 2HINGE"], filter_3__["Fit to DIN"], filter_4__["304"], filter_5__["DN125"], filter_8__["Clamp ends"], lead_time__3-5 days, source_name__CLAMP RING DN125-304, stock_code__SI , alsis_code__5049, customs_statistical_number__73072390, dimension_a__134, filter_1__["Clamp ring"], filter_2__["CR WN 2HINGE"], filter_3__["Fit to DIN"], filter_4__["304"], filter_5__["DN100"], filter_8__["Clamp ends"], lead_time__3-5 days, source_name__CLAMPRING DN100, stock_code__SI , alsis_code__5049, customs_statistical_number__73072390, dimension_a__109, filter_1__["Clamp ring"], filter_2__["CR WN 2HINGE"], filter_3__["Fit to DIN"], filter_4__["304"], filter_5__["DN80"], filter_8__["Clamp ends"], lead_time__3-5 days, source_name__CLAMP RING DN80-304, stock_code__SI , alsis_code__5049, customs_statistical_number__73072390, dimension_a__37, filter_1__["Clamp ring"], filter_2__["CR WN 2HINGE"], filter_3__["Fit to DIN"], filter_4__["304"], filter_5__["DN10-20"], filter_8__["Clamp ends"], lead_time__3-5 days, source_name__CLAMP RING DN10-15-20-304, stock_code__SI , alsis_code__5049, customs_statistical_number__73072390, dimension_a__37.5, filter_1__["Clamp ring"], filter_2__["CR WN DIN"], filter_3__["Fit to DIN"], filter_4__["304"], filter_5__["DN10"], filter_8__["Clamp ends"], lead_time__3-5 days, source_name__CLAMP RING DN10"-20-304, stock_code__SI , alsis_code__5007, dimension_l__35.36, dimension_r__50, filter_1__["Bends 45"], filter_2__["BS"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN25"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__29.00/26.00 x 1.50, source_name__BEND 45 BS DN25 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__118.1, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN80"], filter_6__["DN40"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__85.00/81.00 x 2.00, od2_id2_x_t2__41.00/38.00 x 1.50, source_name__RED RE DN80/40 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5060, filter_1__["Bolt and nut set"], filter_2__["Screw and Nut set"], filter_3__["DIN 11864-2/11853-2"], filter_4__["1.4301 (304)"], filter_5__["DN150"], lead_time__On request, nuts__8 x M10 x 50, screws__8 x M10, source_name__SCREW AND NUT SET DN150 - DIN 11864-2/11853-2, stock_code__NI , alsis_code__5035, dimension_b__5, dimension_d__152, filter_1__["O-ring"], filter_2__["O-ring (R)"], filter_3__["DIN 11864/11853"], filter_4__["FPM"], filter_5__["DN150"], lead_time__On request, source_name__O-RING R DN150 FPM - DIN 11864/11853, stock_code__NI , alsis_code__5035, dimension_b__5, dimension_d__127, filter_1__["O-ring"], filter_2__["O-ring (R)"], filter_3__["DIN 11864/11853"], filter_4__["FPM"], filter_5__["DN125"], lead_time__On request, source_name__O-RING R DN125 FPM - DIN 11864/11853, stock_code__NI , alsis_code__5035, dimension_b__5, dimension_d__127, filter_1__["O-ring"], filter_2__["O-ring (R)"], filter_3__["DIN 11864/11853"], filter_4__["EPDM (E)"], filter_5__["DN125"], lead_time__3-5 days, source_name__O-RING R DN125 EPDM - DIN 11864/11853, stock_code__SI , alsis_code__5057, dimension_a__213, dimension_b__28, dimension_f__188, filter_1__["Flange"], filter_2__["BF collar"], filter_3__["DIN 11853-2"], filter_4__["1.4404 (316L)"], filter_5__["DN150"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__154.00/150.00 x 2.00, source_name__FLANGE BF DN150 H3 1.4404 - DIN 11853-2, stock_code__SI , alsis_code__5035, dimension_b__5, dimension_d__152, filter_1__["O-ring"], filter_2__["O-ring (R)"], filter_3__["DIN 11864/11853"], filter_4__["EPDM (E)"], filter_5__["DN150"], lead_time__3-5 days, source_name__O-RING R DN150 EPDM - DIN 11864/11853, stock_code__SI , alsis_code__5057, dimension_a__183, dimension_b__28, dimension_f__161, filter_1__["Flange"], filter_2__["BF collar"], filter_3__["DIN 11853-2"], filter_4__["1.4404 (316L)"], filter_5__["DN125"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__129.00/125.00 x 2.00, source_name__FLANGE BF DN125 H3 1.4404 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__159, dimension_b__26, dimension_f__137, filter_1__["Flange"], filter_2__["BF collar"], filter_3__["DIN 11853-2"], filter_4__["1.4404 (316L)"], filter_5__["DN100"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__104.00/100.00 x 2.00, source_name__FLANGE BF DN100 H3 1.4404 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__133, dimension_b__26, dimension_f__112, filter_1__["Flange"], filter_2__["BF collar"], filter_3__["DIN 11853-2"], filter_4__["1.4307 (304L)"], filter_5__["DN80"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__85.00/81.00 x 2.00, source_name__FLANGE BF DN80 H3 1.4307 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__133, dimension_b__26, dimension_f__112, filter_1__["Flange"], filter_2__["BF collar"], filter_3__["DIN 11853-2"], filter_4__["1.4404 (316L)"], filter_5__["DN80"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__85.00/81.00 x 2.00, source_name__FLANGE BF DN80 H3 1.4404 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__113, dimension_b__24, dimension_f__95, filter_1__["Flange"], filter_2__["BF collar"], filter_3__["DIN 11853-2"], filter_4__["1.4404 (316L)"], filter_5__["DN65"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__70.00/66.00 x 2.00, source_name__FLANGE BF DN65 H3 1.4404 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__94, dimension_b__24, dimension_f__77, filter_1__["Flange"], filter_2__["BF collar"], filter_3__["DIN 11853-2"], filter_4__["1.4404 (316L)"], filter_5__["DN50"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__53.00/50.00 x 1.50, source_name__FLANGE BF DN50 H3 1.4404 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__82, dimension_b__24, dimension_f__65, filter_1__["Flange"], filter_2__["BF collar"], filter_3__["DIN 11853-2"], filter_4__["1.4404 (316L)"], filter_5__["DN40"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__41.00/38.00 x 1.50, source_name__FLANGE BF DN40 H3 1.4404 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__76, dimension_b__24, dimension_f__59, filter_1__["Flange"], filter_2__["BF collar"], filter_3__["DIN 11853-2"], filter_4__["1.4404 (316L)"], filter_5__["DN32"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__35.00/32.00 x 1.50, source_name__FLANGE BF DN32 H3 1.4404 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__70, dimension_b__24, dimension_f__53, filter_1__["Flange"], filter_2__["BF collar"], filter_3__["DIN 11853-2"], filter_4__["1.4404 (316L)"], filter_5__["DN25"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__29.00/26.00 x 1.50, source_name__FLANGE BF DN25 H3 1.4404 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__64, dimension_b__24, dimension_f__47, filter_1__["Flange"], filter_2__["BF collar"], filter_3__["DIN 11853-2"], filter_4__["1.4404 (316L)"], filter_5__["DN20"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__23.00/20.00 x 1.50, source_name__FLANGE BF DN20 H3 1.4404 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__59, dimension_b__24, dimension_f__42, filter_1__["Flange"], filter_2__["BF collar"], filter_3__["DIN 11853-2"], filter_4__["1.4404 (316L)"], filter_5__["DN15"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__19.00/16.00 x 1.50, source_name__FLANGE BF DN15 H3 1.4404 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__54, dimension_b__24, dimension_f__37, filter_1__["Flange"], filter_2__["BF collar"], filter_3__["DIN 11853-2"], filter_4__["1.4404 (316L)"], filter_5__["DN10"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__13.00/10.00 x 1.50, source_name__FLANGE BF DN10 H3 1.4404 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__213, dimension_b__28, dimension_f__188, filter_1__["Flange"], filter_2__["BF collar"], filter_3__["DIN 11853-2"], filter_4__["1.4307 (304L)"], filter_5__["DN150"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__154.00/150.00 x 2.00, source_name__FLANGE BF DN150 H3 1.4307 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__183, dimension_b__28, dimension_f__161, filter_1__["Flange"], filter_2__["BF collar"], filter_3__["DIN 11853-2"], filter_4__["1.4307 (304L)"], filter_5__["DN125"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__129.00/125.00 x 2.00, source_name__FLANGE BF DN125 H3 1.4307 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__159, dimension_b__26, dimension_f__137, filter_1__["Flange"], filter_2__["BF collar"], filter_3__["DIN 11853-2"], filter_4__["1.4307 (304L)"], filter_5__["DN100"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__104.00/100.00 x 2.00, source_name__FLANGE BF DN100 H3 1.4307 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__82, dimension_b__24, dimension_f__65, filter_1__["Flange"], filter_2__["BF collar"], filter_3__["DIN 11853-2"], filter_4__["1.4307 (304L)"], filter_5__["DN40"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__41.00/38.00 x 1.50, source_name__FLANGE BF DN40 H3 1.4307 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__113, dimension_b__24, dimension_f__95, filter_1__["Flange"], filter_2__["BF collar"], filter_3__["DIN 11853-2"], filter_4__["1.4307 (304L)"], filter_5__["DN65"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__70.00/66.00 x 2.00, source_name__FLANGE BF DN65 H3 1.4307 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__94, dimension_b__24, dimension_f__77, filter_1__["Flange"], filter_2__["BF collar"], filter_3__["DIN 11853-2"], filter_4__["1.4307 (304L)"], filter_5__["DN50"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__53.00/50.00 x 1.50, source_name__FLANGE BF DN50 H3 1.4307 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__76, dimension_b__24, dimension_f__59, filter_1__["Flange"], filter_2__["BF collar"], filter_3__["DIN 11853-2"], filter_4__["1.4307 (304L)"], filter_5__["DN32"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__35.00/32.00 x 1.50, source_name__FLANGE BF DN32 H3 1.4307 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__70, dimension_b__24, dimension_f__53, filter_1__["Flange"], filter_2__["BF collar"], filter_3__["DIN 11853-2"], filter_4__["1.4307 (304L)"], filter_5__["DN25"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__29.00/26.00 x 1.50, source_name__FLANGE BF DN25 H3 1.4307 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__64, dimension_b__24, dimension_f__47, filter_1__["Flange"], filter_2__["BF collar"], filter_3__["DIN 11853-2"], filter_4__["1.4307 (304L)"], filter_5__["DN20"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__23.00/20.00 x 1.50, source_name__FLANGE BF DN20 H3 1.4307 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__59, dimension_b__24, dimension_f__42, filter_1__["Flange"], filter_2__["BF collar"], filter_3__["DIN 11853-2"], filter_4__["1.4307 (304L)"], filter_5__["DN15"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__19.00/16.00 x 1.50, source_name__FLANGE BF DN15 H3 1.4307 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__54, dimension_b__24, dimension_f__37, filter_1__["Flange"], filter_2__["BF collar"], filter_3__["DIN 11853-2"], filter_4__["1.4307 (304L)"], filter_5__["DN10"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__13.00/10.00 x 1.50, source_name__FLANGE BF DN10 H3 1.4307 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__213, dimension_b__29.5, dimension_f__188, filter_1__["Flange"], filter_2__["NF groove"], filter_3__["DIN 11853-2"], filter_4__["1.4404 (316L)"], filter_5__["DN150"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__154.00/150.00 x 2.00, source_name__FLANGE NF DN150 H3 1.4404 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__183, dimension_b__29.5, dimension_f__161, filter_1__["Flange"], filter_2__["NF groove"], filter_3__["DIN 11853-2"], filter_4__["1.4404 (316L)"], filter_5__["DN125"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__129.00/125.00 x 2.00, source_name__FLANGE NF DN125 H3 1.4404 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__159, dimension_b__27.5, dimension_f__137, filter_1__["Flange"], filter_2__["NF groove"], filter_3__["DIN 11853-2"], filter_4__["1.4404 (316L)"], filter_5__["DN100"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__104.00/100.00 x 2.00, source_name__FLANGE NF DN100 H3 1.4404 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__133, dimension_b__27.5, dimension_f__112, filter_1__["Flange"], filter_2__["NF groove"], filter_3__["DIN 11853-2"], filter_4__["1.4404 (316L)"], filter_5__["DN80"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__85.00/81.00 x 2.00, source_name__FLANGE NF DN80 H3 1.4404 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__113, dimension_b__25.5, dimension_f__95, filter_1__["Flange"], filter_2__["NF groove"], filter_3__["DIN 11853-2"], filter_4__["1.4404 (316L)"], filter_5__["DN65"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__70.00/66.00 x 2.00, source_name__FLANGE NF DN65 H3 1.4404 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__94, dimension_b__25.5, dimension_f__77, filter_1__["Flange"], filter_2__["NF groove"], filter_3__["DIN 11853-2"], filter_4__["1.4404 (316L)"], filter_5__["DN50"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__53.00/50.00 x 1.50, source_name__FLANGE NF DN50 H3 1.4404. - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__82, dimension_b__25.5, dimension_f__65, filter_1__["Flange"], filter_2__["NF groove"], filter_3__["DIN 11853-2"], filter_4__["1.4404 (316L)"], filter_5__["DN40"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__41.00/38.00 x 1.50, source_name__FLANGE NF DN40 H3 1.4404 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__76, dimension_b__25.5, dimension_f__59, filter_1__["Flange"], filter_2__["NF groove"], filter_3__["DIN 11853-2"], filter_4__["1.4404 (316L)"], filter_5__["DN32"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__35.00/32.00 x 1.50, source_name__FLANGE NF DN32 H3 1.4404 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__70, dimension_b__25.5, dimension_f__53, filter_1__["Flange"], filter_2__["NF groove"], filter_3__["DIN 11853-2"], filter_4__["1.4404 (316L)"], filter_5__["DN25"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__29.00/26.00 x 1.50, source_name__FLANGE NF DN25 H3 1.4404 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__64, dimension_b__25.5, dimension_f__47, filter_1__["Flange"], filter_2__["NF groove"], filter_3__["DIN 11853-2"], filter_4__["1.4404 (316L)"], filter_5__["DN20"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__23.00/20.00 x 1.50, source_name__FLANGE NF DN20 H3 1.4404 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__59, dimension_b__25.5, dimension_f__42, filter_1__["Flange"], filter_2__["NF groove"], filter_3__["DIN 11853-2"], filter_4__["1.4404 (316L)"], filter_5__["DN15"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__19.00/16.00 x 1.50, source_name__FLANGE NF DN15 H3 1.4404 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__54, dimension_b__25.5, dimension_f__37, filter_1__["Flange"], filter_2__["NF groove"], filter_3__["DIN 11853-2"], filter_4__["1.4404 (316L)"], filter_5__["DN10"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__13.00/10.00 x 1.50, source_name__FLANGE NF DN10 H3 1.4404 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__213, dimension_b__29.5, dimension_f__188, filter_1__["Flange"], filter_2__["NF groove"], filter_3__["DIN 11853-2"], filter_4__["1.4307 (304L)"], filter_5__["DN150"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__154.00/150.00 x 2.00, source_name__FLANGE NF DN150 H3 1.4307 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__183, dimension_b__29.5, dimension_f__161, filter_1__["Flange"], filter_2__["NF groove"], filter_3__["DIN 11853-2"], filter_4__["1.4307 (304L)"], filter_5__["DN125"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__129.00/125.00 x 2.00, source_name__FLANGE NF DN125 H3 1.4307 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__159, dimension_b__27.5, dimension_f__137, filter_1__["Flange"], filter_2__["NF groove"], filter_3__["DIN 11853-2"], filter_4__["1.4307 (304L)"], filter_5__["DN100"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__104.00/100.00 x 2.00, source_name__FLANGE NF DN100 H3 1.4307 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__133, dimension_b__27.5, dimension_f__112, filter_1__["Flange"], filter_2__["NF groove"], filter_3__["DIN 11853-2"], filter_4__["1.4307 (304L)"], filter_5__["DN80"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__85.00/81.00 x 2.00, source_name__FLANGE NF DN80 H3 1.4307 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__113, dimension_b__25.5, dimension_f__95, filter_1__["Flange"], filter_2__["NF groove"], filter_3__["DIN 11853-2"], filter_4__["1.4307 (304L)"], filter_5__["DN65"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__70.00/66.00 x 2.00, source_name__FLANGE NF DN65 H3 1.4307 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__94, dimension_b__25.5, dimension_f__77, filter_1__["Flange"], filter_2__["NF groove"], filter_3__["DIN 11853-2"], filter_4__["1.4307 (304L)"], filter_5__["DN50"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__53.00/50.00 x 1.50, source_name__FLANGE NF DN50 H3 1.4307 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__82, dimension_b__25.5, dimension_f__65, filter_1__["Flange"], filter_2__["NF groove"], filter_3__["DIN 11853-2"], filter_4__["1.4307 (304L)"], filter_5__["DN40"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__41.00/38.00 x 1.50, source_name__FLANGE NF DN40 H3 1.4307 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__76, dimension_b__25.5, dimension_f__59, filter_1__["Flange"], filter_2__["NF groove"], filter_3__["DIN 11853-2"], filter_4__["1.4307 (304L)"], filter_5__["DN32"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__35.00/32.00 x 1.50, source_name__FLANGE NF DN32 H3 1.4307 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__70, dimension_b__25.5, dimension_f__53, filter_1__["Flange"], filter_2__["NF groove"], filter_3__["DIN 11853-2"], filter_4__["1.4307 (304L)"], filter_5__["DN25"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__29.00/26.00 x 1.50, source_name__FLANGE NF DN25 H3 1.4307 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__54, dimension_b__25.5, dimension_f__37, filter_1__["Flange"], filter_2__["NF groove"], filter_3__["DIN 11853-2"], filter_4__["1.4307 (304L)"], filter_5__["DN10"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__13.00/10.00 x 1.50, source_name__FLANGE NF DN10 H3 1.4307 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__64, dimension_b__25.5, dimension_f__47, filter_1__["Flange"], filter_2__["NF groove"], filter_3__["DIN 11853-2"], filter_4__["1.4307 (304L)"], filter_5__["DN20"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__23.00/20.00 x 1.50, source_name__FLANGE NF DN20 H3 1.4307 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__59, dimension_b__25.5, dimension_f__42, filter_1__["Flange"], filter_2__["NF groove"], filter_3__["DIN 11853-2"], filter_4__["1.4307 (304L)"], filter_5__["DN15"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__19.00/16.00 x 1.50, source_name__FLANGE NF DN15 H3 1.4307 - DIN 11853-2, stock_code__SI , alsis_code__5057, dimension_a__118.9, dimension_b__46, filter_1__["Liner"], filter_2__["BS"], filter_3__["DIN 11853-1"], filter_4__["1.4307 (304L)"], filter_5__["DN100"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__104.00/100.00 x 2.00, source_name__LINER BS DN100 H3 1.4307 - DIN 11853-1, stock_code__SI , alsis_code__5057, dimension_a__98.9, dimension_b__38, filter_1__["Liner"], filter_2__["BS"], filter_3__["DIN 11853-1"], filter_4__["1.4307 (304L)"], filter_5__["DN80"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__85.00/81.00 x 2.00, source_name__LINER BS DN80 H3 1.4307 - DIN 11853-1, stock_code__SI , alsis_code__5057, dimension_a__84.9, dimension_b__34, filter_1__["Liner"], filter_2__["BS"], filter_3__["DIN 11853-1"], filter_4__["1.4307 (304L)"], filter_5__["DN65"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__70.00/66.00 x 2.00, source_name__LINER BS DN65 H3 1.4307 - DIN 11853-1, stock_code__SI , alsis_code__5057, dimension_a__66.9, dimension_b__30, filter_1__["Liner"], filter_2__["BS"], filter_3__["DIN 11853-1"], filter_4__["1.4307 (304L)"], filter_5__["DN50"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__53.00/50.00 x 1.50, source_name__LINER BS DN50 H3 1.4307 - DIN 11853-1, stock_code__SI , alsis_code__5057, dimension_a__54.9, dimension_b__26, filter_1__["Liner"], filter_2__["BS"], filter_3__["DIN 11853-1"], filter_4__["1.4307 (304L)"], filter_5__["DN40"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__41.00/38.00 x 1.50, source_name__LINER BS DN40 H3 1.4307 - DIN 11853-1, stock_code__SI , alsis_code__5057, dimension_a__48.9, dimension_b__25, filter_1__["Liner"], filter_2__["BS"], filter_3__["DIN 11853-1"], filter_4__["1.4307 (304L)"], filter_5__["DN32"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__35.00/32.00 x 1.50, source_name__LINER BS DN32 H3 1.4307 - DIN 11853-1, stock_code__SI , alsis_code__5057, dimension_a__42.9, dimension_b__22, filter_1__["Liner"], filter_2__["BS"], filter_3__["DIN 11853-1"], filter_4__["1.4307 (304L)"], filter_5__["DN25"], filter_7__["H3 (ID=0.8/OD=1.0)"], filter_8__["Weld ends"], lead_time__3-5 days, od_id_x_t__29.00/26.00 x 1.50, source_name__LINER BS DN25 H3 1.4307 - DIN 11853-1, stock_code__SI , alsis_code__5068, dimension_l__137, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN200"], filter_6__["DN150"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__204.00/200.00 x 2.00, od2_id2_x_t2__154.00/150.00 x 2.00, source_name__RED RE DN200/150 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__206, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN200"], filter_6__["DN125"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__204.00/200.00 x 2.00, od2_id2_x_t2__129.00/125.00 x 2.00, source_name__RED RE DN200/125 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__275, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN200"], filter_6__["DN100"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__204.00/200.00 x 2.00, od2_id2_x_t2__104.00/100.00 x 2.00, source_name__RED RE DN200/100 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__327, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN200"], filter_6__["DN80"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__204.00/200.00 x 2.00, od2_id2_x_t2__85.00/81.00 x 2.00, source_name__RED RE DN200/80 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__368, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN200"], filter_6__["DN65"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__204.00/200.00 x 2.00, od2_id2_x_t2__70.00/66.00 x 2.00, source_name__RED RE DN200/65 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__68.7, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN150"], filter_6__["DN125"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__154.00/150.00 x 2.00, od2_id2_x_t2__129.00/125.00 x 2.00, source_name__RED RE DN150/125 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__137.4, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN150"], filter_6__["DN100"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__154.00/150.00 x 2.00, od2_id2_x_t2__104.00/100.00 x 2.00, source_name__RED RE DN150/100 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__189.6, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN150"], filter_6__["DN80"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__154.00/150.00 x 2.00, od2_id2_x_t2__85.00/81.00 x 2.00, source_name__RED RE DN150/80 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__230.8, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN150"], filter_6__["DN65"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__154.00/150.00 x 2.00, od2_id2_x_t2__70.00/66.00 x 2.00, source_name__RED RE DN150/65 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__68.7, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN125"], filter_6__["DN100"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__129.00/125.00 x 2.00, od2_id2_x_t2__104.00/100.00 x 2.00, source_name__RED RE DN125/100 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__120.9, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN125"], filter_6__["DN80"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__129.00/125.00 x 2.00, od2_id2_x_t2__85.00/81.00 x 2.00, source_name__RED RE DN125/80 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__162.1, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN125"], filter_6__["DN65"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__129.00/125.00 x 2.00, od2_id2_x_t2__70.00/66.00 x 2.00, source_name__RED RE DN125/65 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__206.1, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN125"], filter_6__["DN50"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__129.00/125.00 x 2.00, od2_id2_x_t2__54.00/50.00 x 2.00, source_name__RED RE DN125/50 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__239, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN125"], filter_6__["DN40"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__129.00/125.00 x 2.00, od2_id2_x_t2__41.00/38.00 x 1.50, source_name__RED RE DN125/40 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__255.5, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN125"], filter_6__["DN32"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__129.00/125.00 x 2.00, od2_id2_x_t2__35.00/32.00 x 1.50, source_name__RED RE DN125/32 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__272, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN125"], filter_6__["DN25"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__129.00/125.00 x 2.00, od2_id2_x_t2__29.00/26.00 x 1.50, source_name__RED RE DN125/25 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__52.2, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN100"], filter_6__["DN80"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__104.00/100.00 x 2.00, od2_id2_x_t2__85.00/81.00 x 2.00, source_name__RED RE DN100/80 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__93.4, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN100"], filter_6__["DN65"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__104.00/100.00 x 2.00, od2_id2_x_t2__70.00/66.00 x 2.00, source_name__RED RE DN100/65 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__137.4, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN100"], filter_6__["DN50"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__104.00/100.00 x 2.00, od2_id2_x_t2__54.00/50.00 x 2.00, source_name__RED RE DN100/50 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__170.3, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN100"], filter_6__["DN40"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__104.00/100.00 x 2.00, od2_id2_x_t2__42.00/38.00 x 2.00, source_name__RED RE DN100/40 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__186.8, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN100"], filter_6__["DN32"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__104.00/100.00 x 2.00, od2_id2_x_t2__35.00/32.00 x 1.50, source_name__RED RE DN100/32 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__203.3, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN100"], filter_6__["DN25"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__104.00/100.00 x 2.00, od2_id2_x_t2__29.00/26.00 x 1.50, source_name__RED RE DN100/25 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__41.2, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN80"], filter_6__["DN65"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__85.00/81.00 x 2.00, od2_id2_x_t2__70.00/66.00 x 2.00, source_name__RED RE DN80/65 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__85.2, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN80"], filter_6__["DN50"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__85.00/81.00 x 2.00, od2_id2_x_t2__54.00/50.00 x 2.00, source_name__RED RE DN80/50 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__134.6, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN80"], filter_6__["DN32"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__85.00/81.00 x 2.00, od2_id2_x_t2__35.00/32.00 x 1.50, source_name__RED RE DN80/32 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__151.1, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN80"], filter_6__["DN25"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__85.00/81.00 x 2.00, od2_id2_x_t2__29.00/26.00 x 1.50, source_name__RED RE DN80/25 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__44, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN65"], filter_6__["DN50"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__70.00/66.00 x 2.00, od2_id2_x_t2__54.00/50.00 x 2.00, source_name__RED RE DN65/50 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__76.9, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN65"], filter_6__["DN40"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__On request, od1_id1_x_t1__70.00/66.00 x 2.00, od2_id2_x_t2__42.00/38.00 x 2.00, source_name__RED RE DN65/40 HSF2 1.4404 - DIN 11852, stock_code__NI , alsis_code__5068, dimension_l__93.4, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN65"], filter_6__["DN32"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__70.00/66.00 x 2.00, od2_id2_x_t2__35.00/32.00 x 1.50, source_name__RED RE DN65/32 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__109.9, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN65"], filter_6__["DN25"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__70.00/66.00 x 2.00, od2_id2_x_t2__29.00/26.00 x 1.50, source_name__RED RE DN65/25 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__33, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN50"], filter_6__["DN40"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__53.00/50.00 x 1.50, od2_id2_x_t2__41.00/38.00 x 1.50, source_name__RED RE DN50/40 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__49.5, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN50"], filter_6__["DN32"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__53.00/50.00 x 1.50, od2_id2_x_t2__35.00/32.00 x 1.50, source_name__RED RE DN50/32 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__65.9, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN50"], filter_6__["DN25"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__53.00/50.00 x 1.50, od2_id2_x_t2__29.00/26.00 x 1.50, source_name__RED RE DN50/25 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__16.5, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN40"], filter_6__["DN32"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__41.00/38.00 x 1.50, od2_id2_x_t2__35.00/32.00 x 1.50, source_name__RED RE DN40/32 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__33, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN40"], filter_6__["DN25"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__41.00/38.00 x 1.50, od2_id2_x_t2__29.00/26.00 x 1.50, source_name__RED RE DN40/25 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__49.5, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN40"], filter_6__["DN20"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__41.00/38.00 x 1.50, od2_id2_x_t2__23.00/20.00 x 1.50, source_name__RED RE DN40/20 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__60.4, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN40"], filter_6__["DN15"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__41.00/38.00 x 1.50, od2_id2_x_t2__19.00/16.00 x 1.50, source_name__RED RE DN40/15 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__16.5, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN32"], filter_6__["DN25"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__35.00/32.00 x 1.50, od2_id2_x_t2__29.00/26.00 x 1.50, source_name__RED RE DN32/25 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__33, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN32"], filter_6__["DN20"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__35.00/32.00 x 1.50, od2_id2_x_t2__23.00/20.00 x 1.50, source_name__RED RE DN32/20 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__44, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN32"], filter_6__["DN15"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__35.00/32.00 x 1.50, od2_id2_x_t2__19.00/16.00 x 1.50, source_name__RED RE DN32/15 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__16.5, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN25"], filter_6__["DN20"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__29.00/26.00 x 1.50, od2_id2_x_t2__23.00/20.00 x 1.50, source_name__RED RE DN25/20 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__27.5, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN25"], filter_6__["DN15"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__29.00/26.00 x 1.50, od2_id2_x_t2__19.00/16.00 x 1.50, source_name__RED RE DN25/15 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__44, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN25"], filter_6__["DN10"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__29.00/26.00 x 1.50, od2_id2_x_t2__13.00/10.00 x 1.50, source_name__RED RE DN25/10 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__11, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN20"], filter_6__["DN15"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__23.00/20.00 x 1.50, od2_id2_x_t2__19.00/16.00 x 1.50, source_name__RED RE DN20/15 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__27.5, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN20"], filter_6__["DN10"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__23.00/20.00 x 1.50, od2_id2_x_t2__13.00/10.00 x 1.50, source_name__RED RE DN20/10 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__16.5, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN15"], filter_6__["DN10"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__19.00/16.00 x 1.50, od2_id2_x_t2__13.00/10.00 x 1.50, source_name__RED RE DN15/10 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__137, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN200"], filter_6__["DN150"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__204.00/200.00 x 2.00, od2_id2_x_t2__154.00/150.00 x 2.00, source_name__RED RE DN200/150 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__206, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN200"], filter_6__["DN125"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__204.00/200.00 x 2.00, od2_id2_x_t2__129.00/125.00 x 2.00, source_name__RED RE DN200/125 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__275, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN200"], filter_6__["DN100"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__204.00/200.00 x 2.00, od2_id2_x_t2__104.00/100.00 x 2.00, source_name__RED RE DN200/100 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__327, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN200"], filter_6__["DN80"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__204.00/200.00 x 2.00, od2_id2_x_t2__85.00/81.00 x 2.00, source_name__RED RE DN200/80 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__368, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN200"], filter_6__["DN65"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__204.00/200.00 x 2.00, od2_id2_x_t2__70.00/66.00 x 2.00, source_name__RED RE DN200/65 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__68.7, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN150"], filter_6__["DN125"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__154.00/150.00 x 2.00, od2_id2_x_t2__129.00/125.00 x 2.00, source_name__RED RE DN150/125 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__137.4, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN150"], filter_6__["DN100"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__154.00/150.00 x 2.00, od2_id2_x_t2__104.00/100.00 x 2.00, source_name__RED RE DN150/100 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__189.6, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN150"], filter_6__["DN80"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__154.00/150.00 x 2.00, od2_id2_x_t2__85.00/81.00 x 2.00, source_name__RED RE DN150/80 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__230.8, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN150"], filter_6__["DN65"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__154.00/150.00 x 2.00, od2_id2_x_t2__70.00/66.00 x 2.00, source_name__RED RE DN150/65 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__68.7, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN125"], filter_6__["DN100"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__129.00/125.00 x 2.00, od2_id2_x_t2__104.00/100.00 x 2.00, source_name__RED RE DN125/100 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__120.9, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN125"], filter_6__["DN80"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__129.00/125.00 x 2.00, od2_id2_x_t2__85.00/81.00 x 2.00, source_name__RED RE DN125/80 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__162.1, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN125"], filter_6__["DN65"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__129.00/125.00 x 2.00, od2_id2_x_t2__70.00/66.00 x 2.00, source_name__RED RE DN125/65 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__206.1, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN125"], filter_6__["DN50"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__129.00/125.00 x 2.00, od2_id2_x_t2__54.00/50.00 x 2.00, source_name__RED RE DN125/50 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__239, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN125"], filter_6__["DN40"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__129.00/125.00 x 2.00, od2_id2_x_t2__41.00/38.00 x 1.50, source_name__RED RE DN125/40 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__255.5, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN125"], filter_6__["DN32"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__129.00/125.00 x 2.00, od2_id2_x_t2__35.00/32.00 x 1.50, source_name__RED RE DN125/32 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__272, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN125"], filter_6__["DN25"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__129.00/125.00 x 2.00, od2_id2_x_t2__29.00/26.00 x 1.50, source_name__RED RE DN125/25 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__52.2, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN100"], filter_6__["DN80"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__104.00/100.00 x 2.00, od2_id2_x_t2__85.00/81.00 x 2.00, source_name__RED RE DN100/80 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__93.4, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN100"], filter_6__["DN65"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__104.00/100.00 x 2.00, od2_id2_x_t2__70.00/66.00 x 2.00, source_name__RED RE DN100/65 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__137.4, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN100"], filter_6__["DN50"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__104.00/100.00 x 2.00, od2_id2_x_t2__54.00/50.00 x 2.00, source_name__RED RE DN100/50 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__170.3, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN100"], filter_6__["DN40"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__104.00/100.00 x 2.00, od2_id2_x_t2__42.00/38.00 x 2.00, source_name__RED RE DN100/40 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__186.8, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN100"], filter_6__["DN32"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__104.00/100.00 x 2.00, od2_id2_x_t2__35.00/32.00 x 1.50, source_name__RED RE DN100/32 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__203.3, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN100"], filter_6__["DN25"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__104.00/100.00 x 2.00, od2_id2_x_t2__29.00/26.00 x 1.50, source_name__RED RE DN100/25 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__41.2, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN80"], filter_6__["DN65"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__85.00/81.00 x 2.00, od2_id2_x_t2__70.00/66.00 x 2.00, source_name__RED RE DN80/65 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__85.2, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN80"], filter_6__["DN50"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__85.00/81.00 x 2.00, od2_id2_x_t2__54.00/50.00 x 2.00, source_name__RED RE DN80/50 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__118.1, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN80"], filter_6__["DN40"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__85.00/81.00 x 2.00, od2_id2_x_t2__41.00/38.00 x 1.50, source_name__RED RE DN80/40 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__134.6, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN80"], filter_6__["DN32"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__85.00/81.00 x 2.00, od2_id2_x_t2__35.00/32.00 x 1.50, source_name__RED RE DN80/32 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__151.1, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN80"], filter_6__["DN25"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__85.00/81.00 x 2.00, od2_id2_x_t2__29.00/26.00 x 1.50, source_name__RED RE DN80/25 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__44, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN65"], filter_6__["DN50"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__70.00/66.00 x 2.00, od2_id2_x_t2__54.00/50.00 x 2.00, source_name__RED RE DN65/50 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__76.9, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN65"], filter_6__["DN40"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__70.00/66.00 x 2.00, od2_id2_x_t2__42.00/38.00 x 2.00, source_name__RED RE DN65/40 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__93.4, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN65"], filter_6__["DN32"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__70.00/66.00 x 2.00, od2_id2_x_t2__35.00/32.00 x 1.50, source_name__RED RE DN65/32 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__109.9, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN65"], filter_6__["DN25"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__70.00/66.00 x 2.00, od2_id2_x_t2__29.00/26.00 x 1.50, source_name__RED RE DN65/25 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__33, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN50"], filter_6__["DN40"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__53.00/50.00 x 1.50, od2_id2_x_t2__41.00/38.00 x 1.50, source_name__RED RE DN50/40 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__49.5, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN50"], filter_6__["DN32"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__53.00/50.00 x 1.50, od2_id2_x_t2__35.00/32.00 x 1.50, source_name__RED RE DN50/32 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__65.9, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN50"], filter_6__["DN25"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__On request, od1_id1_x_t1__53.00/50.00 x 1.50, od2_id2_x_t2__29.00/26.00 x 1.50, source_name__RED RE DN50/25 HSF2 1.4307 - DIN 11852, stock_code__NI , alsis_code__5068, dimension_l__16.5, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN40"], filter_6__["DN32"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__41.00/38.00 x 1.50, od2_id2_x_t2__35.00/32.00 x 1.50, source_name__RED RE DN40/32 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__33, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN40"], filter_6__["DN25"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__41.00/38.00 x 1.50, od2_id2_x_t2__29.00/26.00 x 1.50, source_name__RED RE DN40/25 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__49.5, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN40"], filter_6__["DN20"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__41.00/38.00 x 1.50, od2_id2_x_t2__23.00/20.00 x 1.50, source_name__RED RE DN40/20 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__60.4, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN40"], filter_6__["DN15"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__41.00/38.00 x 1.50, od2_id2_x_t2__19.00/16.00 x 1.50, source_name__RED RE DN40/15 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__16.5, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN32"], filter_6__["DN25"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__35.00/32.00 x 1.50, od2_id2_x_t2__29.00/26.00 x 1.50, source_name__RED RE DN32/25 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__33, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN32"], filter_6__["DN20"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__35.00/32.00 x 1.50, od2_id2_x_t2__23.00/20.00 x 1.50, source_name__RED RE DN32/20 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__44, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN32"], filter_6__["DN15"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__35.00/32.00 x 1.50, od2_id2_x_t2__19.00/16.00 x 1.50, source_name__RED RE DN32/15 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__16.5, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN25"], filter_6__["DN20"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__29.00/26.00 x 1.50, od2_id2_x_t2__23.00/20.00 x 1.50, source_name__RED RE DN25/20 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__27.5, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN25"], filter_6__["DN15"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__29.00/26.00 x 1.50, od2_id2_x_t2__19.00/16.00 x 1.50, source_name__RED RE DN25/15 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__44, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN25"], filter_6__["DN10"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__29.00/26.00 x 1.50, od2_id2_x_t2__13.00/10.00 x 1.50, source_name__RED RE DN25/10 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__11, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN20"], filter_6__["DN15"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__23.00/20.00 x 1.50, od2_id2_x_t2__19.00/16.00 x 1.50, source_name__RED RE DN20/15 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__27.5, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN20"], filter_6__["DN10"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__23.00/20.00 x 1.50, od2_id2_x_t2__13.00/10.00 x 1.50, source_name__RED RE DN20/10 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__16.5, filter_1__["Eccentric Reducers"], filter_2__["RE"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN15"], filter_6__["DN10"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__19.00/16.00 x 1.50, od2_id2_x_t2__13.00/10.00 x 1.50, source_name__RED RE DN15/10 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__93, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN200"], filter_6__["DN150"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__204.00/200.00 x 2.00, od2_id2_x_t2__154.00/150.00 x 2.00, source_name__RED RK DN200/150 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__140, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN200"], filter_6__["DN125"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__204.00/200.00 x 2.00, od2_id2_x_t2__129.00/125.00 x 2.00, source_name__RED RK DN200/125 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__186, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN200"], filter_6__["DN100"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__204.00/200.00 x 2.00, od2_id2_x_t2__104.00/100.00 x 2.00, source_name__RED RK DN200/100 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__222, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN200"], filter_6__["DN80"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__204.00/200.00 x 2.00, od2_id2_x_t2__85.00/81.00 x 2.00, source_name__RED RK DN200/80 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__250, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN200"], filter_6__["DN65"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__204.00/200.00 x 2.00, od2_id2_x_t2__70.00/66.00 x 2.00, source_name__RED RK DN200/65 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__45, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN150"], filter_6__["DN125"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__154.00/150.00 x 2.00, od2_id2_x_t2__129.00/125.00 x 2.00, source_name__RED RK DN150/125 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__90, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN150"], filter_6__["DN100"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__154.00/150.00 x 2.00, od2_id2_x_t2__104.00/100.00 x 2.00, source_name__RED RK DN150/100 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__124, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN150"], filter_6__["DN80"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__154.00/150.00 x 2.00, od2_id2_x_t2__85.00/81.00 x 2.00, source_name__RED RK DN150/80 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__151, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN150"], filter_6__["DN65"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__154.00/150.00 x 2.00, od2_id2_x_t2__70.00/66.00 x 2.00, source_name__RED RK DN150/65 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__93, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN200"], filter_6__["DN150"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__204.00/200.00 x 2.00, od2_id2_x_t2__154.00/150.00 x 2.00, source_name__RED RK DN200/150 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__140, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN200"], filter_6__["DN125"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__204.00/200.00 x 2.00, od2_id2_x_t2__129.00/125.00 x 2.00, source_name__RED RK DN200/125 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__186, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN200"], filter_6__["DN100"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__204.00/200.00 x 2.00, od2_id2_x_t2__104.00/100.00 x 2.00, source_name__RED RK DN200/100 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__222, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN200"], filter_6__["DN80"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__204.00/200.00 x 2.00, od2_id2_x_t2__85.00/81.00 x 2.00, source_name__RED RK DN200/80 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__250, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN200"], filter_6__["DN65"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__204.00/200.00 x 2.00, od2_id2_x_t2__70.00/66.00 x 2.00, source_name__RED RK DN200/65 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__45, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN150"], filter_6__["DN125"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__154.00/150.00 x 2.00, od2_id2_x_t2__129.00/125.00 x 2.00, source_name__RED RK DN150/125 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__90, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN150"], filter_6__["DN100"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__154.00/150.00 x 2.00, od2_id2_x_t2__104.00/100.00 x 2.00, source_name__RED RK DN150/100 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__124, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN150"], filter_6__["DN80"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__On request, od1_id1_x_t1__154.00/150.00 x 2.00, od2_id2_x_t2__85.00/81.00 x 2.00, source_name__RED RK DN150/80 HSF2 1.4307 - DIN 11852, stock_code__NI , alsis_code__5068, dimension_l__151, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN150"], filter_6__["DN65"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__154.00/150.00 x 2.00, od2_id2_x_t2__70.00/66.00 x 2.00, source_name__RED RK DN150/65 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__45, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN125"], filter_6__["DN100"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__129.00/125.00 x 2.00, od2_id2_x_t2__104.00/100.00 x 2.00, source_name__RED RK DN125/100 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__79, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN125"], filter_6__["DN80"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__129.00/125.00 x 2.00, od2_id2_x_t2__85.00/81.00 x 2.00, source_name__RED RK DN125/80 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__106, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN125"], filter_6__["DN65"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__On request, od1_id1_x_t1__129.00/125.00 x 2.00, od2_id2_x_t2__70.00/66.00 x 2.00, source_name__RED RK DN125/65 HSF2 1.4404 - DIN 11852, stock_code__NI , alsis_code__5068, dimension_l__135, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN125"], filter_6__["DN50"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__129.00/125.00 x 2.00, od2_id2_x_t2__54.00/50.00 x 2.00, source_name__RED RK DN125/50 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__157, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN125"], filter_6__["DN40"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__129.00/125.00 x 2.00, od2_id2_x_t2__41.00/38.00 x 1.50, source_name__RED RK DN125/40 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__168, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN125"], filter_6__["DN32"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__129.00/125.00 x 2.00, od2_id2_x_t2__35.00/32.00 x 1.50, source_name__RED RK DN125/32 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__179, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN125"], filter_6__["DN25"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__129.00/125.00 x 2.00, od2_id2_x_t2__29.00/26.00 x 1.50, source_name__RED RK DN125/25 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__34, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN100"], filter_6__["DN80"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__104.00/100.00 x 2.00, od2_id2_x_t2__85.00/81.00 x 2.00, source_name__RED RK DN100/80 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__61, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN100"], filter_6__["DN65"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__104.00/100.00 x 2.00, od2_id2_x_t2__70.00/66.00 x 2.00, source_name__RED RK DN100/65 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__90, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN100"], filter_6__["DN50"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__104.00/100.00 x 2.00, od2_id2_x_t2__54.00/50.00 x 2.00, source_name__RED RK DN100/50 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__112, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN100"], filter_6__["DN40"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__104.00/100.00 x 2.00, od2_id2_x_t2__42.00/38.00 x 2.00, source_name__RED RK DN100/40 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__123, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN100"], filter_6__["DN32"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__104.00/100.00 x 2.00, od2_id2_x_t2__35.00/32.00 x 1.50, source_name__RED RK DN100/32 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__134, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN100"], filter_6__["DN25"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__104.00/100.00 x 2.00, od2_id2_x_t2__29.00/26.00 x 1.50, source_name__RED RK DN100/25 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__27, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN80"], filter_6__["DN65"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__85.00/81.00 x 2.00, od2_id2_x_t2__70.00/66.00 x 2.00, source_name__RED RK DN80/65 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__56, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN80"], filter_6__["DN50"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__85.00/81.00 x 2.00, od2_id2_x_t2__54.00/50.00 x 2.00, source_name__RED RK DN80/50 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__78, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN80"], filter_6__["DN40"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__85.00/81.00 x 2.00, od2_id2_x_t2__41.00/38.00 x 1.50, source_name__RED RK DN80/40 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__89, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN80"], filter_6__["DN32"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__85.00/81.00 x 2.00, od2_id2_x_t2__35.00/32.00 x 1.50, source_name__RED RK DN80/32 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__100, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN80"], filter_6__["DN25"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__85.00/81.00 x 2.00, od2_id2_x_t2__29.00/26.00 x 1.50, source_name__RED RK DN80/25 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__29, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN65"], filter_6__["DN50"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__70.00/66.00 x 2.00, od2_id2_x_t2__54.00/50.00 x 2.00, source_name__RED RK DN65/50 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__51, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN65"], filter_6__["DN40"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__70.00/66.00 x 2.00, od2_id2_x_t2__42.00/38.00 x 2.00, source_name__RED RK DN65/40 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__62, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN65"], filter_6__["DN32"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__70.00/66.00 x 2.00, od2_id2_x_t2__35.00/32.00 x 1.50, source_name__RED RK DN65/32 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__73, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN65"], filter_6__["DN25"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__70.00/66.00 x 2.00, od2_id2_x_t2__29.00/26.00 x 1.50, source_name__RED RK DN65/25 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__22, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN50"], filter_6__["DN40"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__53.00/50.00 x 1.50, od2_id2_x_t2__41.00/38.00 x 1.50, source_name__RED RK DN50/40 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__33, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN50"], filter_6__["DN32"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__53.00/50.00 x 1.50, od2_id2_x_t2__35.00/32.00 x 1.50, source_name__RED RK DN50/32 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__44, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN50"], filter_6__["DN25"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__53.00/50.00 x 1.50, od2_id2_x_t2__29.00/26.00 x 1.50, source_name__RED RK DN50/25 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__11, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN40"], filter_6__["DN32"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__41.00/38.00 x 1.50, od2_id2_x_t2__35.00/32.00 x 1.50, source_name__RED RK DN40/32 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__22, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN40"], filter_6__["DN25"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__41.00/38.00 x 1.50, od2_id2_x_t2__29.00/26.00 x 1.50, source_name__RED RK DN40/25 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__33, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN40"], filter_6__["DN20"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__41.00/38.00 x 1.50, od2_id2_x_t2__23.00/20.00 x 1.50, source_name__RED RK DN40/20 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__40, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN40"], filter_6__["DN15"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__41.00/38.00 x 1.50, od2_id2_x_t2__19.00/16.00 x 1.50, source_name__RED RK DN40/15 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__11, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN32"], filter_6__["DN25"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__35.00/32.00 x 1.50, od2_id2_x_t2__29.00/26.00 x 1.50, source_name__RED RK DN32/25 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__22, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN32"], filter_6__["DN20"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__35.00/32.00 x 1.50, od2_id2_x_t2__23.00/20.00 x 1.50, source_name__RED RK DN32/20 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__29, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN32"], filter_6__["DN15"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__35.00/32.00 x 1.50, od2_id2_x_t2__19.00/16.00 x 1.50, source_name__RED RK DN32/15 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__11, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN25"], filter_6__["DN20"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__29.00/26.00 x 1.50, od2_id2_x_t2__23.00/20.00 x 1.50, source_name__RED RK DN25/20 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__18, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN25"], filter_6__["DN15"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__29.00/26.00 x 1.50, od2_id2_x_t2__19.00/16.00 x 1.50, source_name__RED RK DN25/15 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__29, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN25"], filter_6__["DN10"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__29.00/26.00 x 1.50, od2_id2_x_t2__13.00/10.00 x 1.50, source_name__RED RK DN25/10 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__7, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN20"], filter_6__["DN15"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__23.00/20.00 x 1.50, od2_id2_x_t2__19.00/16.00 x 1.50, source_name__RED RK DN20/15 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__18, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN20"], filter_6__["DN10"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__23.00/20.00 x 1.50, od2_id2_x_t2__13.00/10.00 x 1.50, source_name__RED RK DN20/10 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__11, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4404 (316L)"], filter_5__["DN15"], filter_6__["DN10"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__19.00/16.00 x 1.50, od2_id2_x_t2__13.00/10.00 x 1.50, source_name__RED RK DN15/10 HSF2 1.4404 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__45, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN125"], filter_6__["DN100"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__129.00/125.00 x 2.00, od2_id2_x_t2__104.00/100.00 x 2.00, source_name__RED RK DN125/100 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__79, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN125"], filter_6__["DN80"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__129.00/125.00 x 2.00, od2_id2_x_t2__85.00/81.00 x 2.00, source_name__RED RK DN125/80 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__106, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN125"], filter_6__["DN65"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__129.00/125.00 x 2.00, od2_id2_x_t2__70.00/66.00 x 2.00, source_name__RED RK DN125/65 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__135, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN125"], filter_6__["DN50"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__129.00/125.00 x 2.00, od2_id2_x_t2__54.00/50.00 x 2.00, source_name__RED RK DN125/50 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__157, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN125"], filter_6__["DN40"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__129.00/125.00 x 2.00, od2_id2_x_t2__41.00/38.00 x 1.50, source_name__RED RK DN125/40 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__168, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN125"], filter_6__["DN32"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__129.00/125.00 x 2.00, od2_id2_x_t2__35.00/32.00 x 1.50, source_name__RED RK DN125/32 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__179, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN125"], filter_6__["DN25"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__129.00/125.00 x 2.00, od2_id2_x_t2__29.00/26.00 x 1.50, source_name__RED RK DN125/25 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__34, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN100"], filter_6__["DN80"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__104.00/100.00 x 2.00, od2_id2_x_t2__85.00/81.00 x 2.00, source_name__RED RK DN100/80 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__61, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN100"], filter_6__["DN65"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__104.00/100.00 x 2.00, od2_id2_x_t2__70.00/66.00 x 2.00, source_name__RED RK DN100/65 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__90, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN100"], filter_6__["DN50"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__On request, od1_id1_x_t1__104.00/100.00 x 2.00, od2_id2_x_t2__54.00/50.00 x 2.00, source_name__RED RK DN100/50 HSF2 1.4307 - DIN 11852, stock_code__NI , alsis_code__5068, dimension_l__112, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN100"], filter_6__["DN40"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__104.00/100.00 x 2.00, od2_id2_x_t2__42.00/38.00 x 2.00, source_name__RED RK DN100/40 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__123, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN100"], filter_6__["DN32"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__104.00/100.00 x 2.00, od2_id2_x_t2__35.00/32.00 x 1.50, source_name__RED RK DN100/32 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__134, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN100"], filter_6__["DN25"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__104.00/100.00 x 2.00, od2_id2_x_t2__29.00/26.00 x 1.50, source_name__RED RK DN100/25 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__27, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN80"], filter_6__["DN65"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__85.00/81.00 x 2.00, od2_id2_x_t2__70.00/66.00 x 2.00, source_name__RED RK DN80/65 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__56, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN80"], filter_6__["DN50"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__85.00/81.00 x 2.00, od2_id2_x_t2__54.00/50.00 x 2.00, source_name__RED RK DN80/50 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__78, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN80"], filter_6__["DN40"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__85.00/81.00 x 2.00, od2_id2_x_t2__41.00/38.00 x 1.50, source_name__RED RK DN80/40 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__89, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN80"], filter_6__["DN32"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__85.00/81.00 x 2.00, od2_id2_x_t2__35.00/32.00 x 1.50, source_name__RED RK DN80/32 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__100, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN80"], filter_6__["DN25"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__85.00/81.00 x 2.00, od2_id2_x_t2__29.00/26.00 x 1.50, source_name__RED RK DN80/25 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__29, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN65"], filter_6__["DN50"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__70.00/66.00 x 2.00, od2_id2_x_t2__54.00/50.00 x 2.00, source_name__RED RK DN65/50 HSF2 1.4307 - DIN 11852, stock_code__SI , alsis_code__5068, dimension_l__51, filter_1__["Concentric Reducers"], filter_2__["RK"], filter_3__["DIN 11852 EN 10374-A"], filter_4__["1.4307 (304L)"], filter_5__["DN65"], filter_6__["DN40"], filter_7__["HSF2 (ID=0.8/OD=1.6)"], filter_8__["Weld ends"], lead_time__3-5 days, od1_id1_x_t1__70.00/66.00 x 2.00, od2_id2_x_t2__42.00/38.00 x 2.00, source_name__RED RK DN65/40 HSF2 1.4307 - DIN 11852, stock_code__SI

Bends 45 (52)
Bends 90 (104)
Blind (96)
Bolt and nut set (6)
Clamp ring (7)
Concentric Reducers (188)
Eccentric Reducers (188)
Ferrule (34)
Flange (72)
Gasket (119)
Liner (109)
Male (82)
Nut (25)
O-ring (24)
Tee (387)
Union (28)

B (8)
BBF collar (12)
BBKS collar (10)
BBS (10)
BD liner (24)
BF collar (36)
BGS male (10)
BKS collar (10)
BL (52)
BNF groove (12)
BNKS groove (10)
BS (131)
C expanding (14)
CR WN 2HINGE (5)
CR WN DIN (2)
D (44)
D certificate (10)
D expanding (14)
Equal Tee (52)
F (25)
G (65)
GS (20)
KK short (24)
KL long (10)
NF groove (36)
NKS groove (10)
O-ring (R) (24)
RE (188)
Reduced Tee Long (143)
Reduced Tee Short (144)
RK (188)
RTK (144)
RTS (143)
S (8)
SC (24)
Screw and Nut set (6)
SD (24)
Short Tee (48)
SK short (20)
SKC short (24)
SKD short (24)
TK (48)
TS (52)

DIN 11851 (266)
DIN 11852 EN 10374-A (919)
DIN 11853-1 (27)
DIN 11853-2 (48)
DIN 11864/11853 (24)
DIN 11864-1 (20)
DIN 11864-1/11853-1 (20)
DIN 11864-2 (24)
DIN 11864-2/11853-2 (30)
DIN 11864-3 (20)
DIN 11864-3/11853-3 (20)
DIN 32676 (96)
Fit to DIN (7)

304 (7)
1.4301 (304) (19)
1.4307 (304L) (577)
1.4307/EPDM (8)
1.4307/NBR (10)
1.4404 (316L) (747)
1.4404/NBR (10)
EPDM (E) (47)
FPM (37)
NBR (23)
PTFE (G) (23)
Silicone (Q) (13)

DN10 (64)
DN10-20 (2)
DN10-50 (1)
DN15 (75)
DN20 (83)
DN25 (97)
DN25-40 (1)
DN32 (105)
DN40 (120)
DN50 (122)
DN65 (139)
DN75 (6)
DN76.1 (1)
DN80 (157)
DN100 (171)
DN100-125 (1)
DN125 (150)
DN150 (126)
DN200 (100)

DN10 (24)
DN15 (32)
DN20 (24)
DN25 (103)
DN32 (88)
DN40 (80)
DN50 (72)
DN65 (80)
DN80 (64)
DN100 (48)
DN125 (32)
DN150 (16)

H3 (ID=0.8/OD=1.0) (221)
HSF0 (ID=0.8/OD=1.6) (225)
HSF2 (ID=0.8/OD=1.6) (460)
HSF3 (ID=0.8/OD=0.8) (459)

Clamp ends (15)
Seal (119)
TriClamp and Weld (54)
Weld and Thread (82)
Weld ends (1132)

Item number

Description

In stock

Price

Quantity

Add to cart

Item number

Description

In stock

The green marker indicates that the product is typically in stock. The yellow marker indicates that the product typically has a little longer lead time

Delivery Time

PricePrice

Showing 1 - 24 of 1522 products

Display

Sort by

View

9613470005

Gasket D DN32 EPDM (E) DIN 32676

On request

Sale price€5,72

9613470006

Gasket D DN40 EPDM (E) DIN 32676

On request

Sale price€10,39

9615220176

Bends 90 BL DN200 HSF2 1.4404 (316L) DIN 11852 EN 10374-A

3-5 days

Sale price€576,73

9613470008

Gasket D DN65 EPDM (E) DIN 32676

On request

Sale price€9,54

9613470001

Gasket D DN10 EPDM (E) DIN 32676

On request

Sale price€10,27

9613470002

Gasket D DN15 EPDM (E) DIN 32676

On request

Sale price€10,30

9613470003

Gasket D DN20 EPDM (E) DIN 32676

On request

Sale price€14,12

9613470004

Gasket D DN25 EPDM (E) DIN 32676

On request

Sale price€10,37

9613470007

Gasket D DN50 EPDM (E) DIN 32676

On request

Sale price€10,51

9613470009

Gasket D DN80 EPDM (E) DIN 32676

On request

Sale price€10,78

9613470010

Gasket D DN100 EPDM (E) DIN 32676

On request

Sale price€27,55

9612905163

Bolt and nut set DN76.1 1.4301 (304) DIN 11864-2/11853-2

On request

Sale price€34,67

9611994459

Clamp ring DN80 304 Fit to DIN

3-5 days

Sale price€76,90

9611993204

Clamp ring DN150 304 Fit to DIN

3-5 days

Sale price€541,32

9611993203

Clamp ring DN125 304 Fit to DIN

3-5 days

Sale price€443,33

9611994192

Clamp ring DN100 304 Fit to DIN

3-5 days

Sale price€91,83

9611993114

Clamp ring DN80 304 Fit to DIN

3-5 days

Sale price€76,90

9611993113

Clamp ring DN10-20 304 Fit to DIN

3-5 days

Sale price€43,68

9611994458

Clamp ring DN10 304 Fit to DIN

3-5 days

Sale price€43,68

9615227322

Bends 45 BS DN25 HSF2 1.4404 (316L) DIN 11852 EN 10374-A

3-5 days

Sale price€36,68

9615332823

Eccentric Reducers DN80 DN40 HSF2 1.4404 (316L) DIN 11852 EN 10374-A

3-5 days

Sale price€59,84

9612905166

Bolt and nut set DN150 1.4301 (304) DIN 11864-2/11853-2

On request

Sale price€37,66

9612906224

O-ring R DN150 FPM DIN 11864/11853

On request

Sale price€264,50

9612906223

O-ring R DN125 FPM DIN 11864/11853

On request

Sale price€179,82

12 3…64

Page 1 / 64Next

Filters (0)

8000130777341

We also believe this work is best left to a sm...

In stock

Sale price300 SEK

Filters

Bends 45 (52)
Bends 90 (104)
Blind (96)
Bolt and nut set (6)
Clamp ring (7)
Concentric Reducers (188)
Eccentric Reducers (188)
Ferrule (34)
Flange (72)
Gasket (119)
Liner (109)
Male (82)
Nut (25)
O-ring (24)
Tee (387)
Union (28)

B (8)
BBF collar (12)
BBKS collar (10)
BBS (10)
BD liner (24)
BF collar (36)
BGS male (10)
BKS collar (10)
BL (52)
BNF groove (12)
BNKS groove (10)
BS (131)
C expanding (14)
CR WN 2HINGE (5)
CR WN DIN (2)
D (44)
D certificate (10)
D expanding (14)
Equal Tee (52)
F (25)
G (65)
GS (20)
KK short (24)
KL long (10)
NF groove (36)
NKS groove (10)
O-ring (R) (24)
RE (188)
Reduced Tee Long (143)
Reduced Tee Short (144)
RK (188)
RTK (144)
RTS (143)
S (8)
SC (24)
Screw and Nut set (6)
SD (24)
Short Tee (48)
SK short (20)
SKC short (24)
SKD short (24)
TK (48)
TS (52)

DIN 11851 (266)
DIN 11852 EN 10374-A (919)
DIN 11853-1 (27)
DIN 11853-2 (48)
DIN 11864/11853 (24)
DIN 11864-1 (20)
DIN 11864-1/11853-1 (20)
DIN 11864-2 (24)
DIN 11864-2/11853-2 (30)
DIN 11864-3 (20)
DIN 11864-3/11853-3 (20)
DIN 32676 (96)
Fit to DIN (7)

304 (7)
1.4301 (304) (19)
1.4307 (304L) (577)
1.4307/EPDM (8)
1.4307/NBR (10)
1.4404 (316L) (747)
1.4404/NBR (10)
EPDM (E) (47)
FPM (37)
NBR (23)
PTFE (G) (23)
Silicone (Q) (13)

DN10 (64)
DN10-20 (2)
DN10-50 (1)
DN15 (75)
DN20 (83)
DN25 (97)
DN25-40 (1)
DN32 (105)
DN40 (120)
DN50 (122)
DN65 (139)
DN75 (6)
DN76.1 (1)
DN80 (157)
DN100 (171)
DN100-125 (1)
DN125 (150)
DN150 (126)
DN200 (100)

DN10 (24)
DN15 (32)
DN20 (24)
DN25 (103)
DN32 (88)
DN40 (80)
DN50 (72)
DN65 (80)
DN80 (64)
DN100 (48)
DN125 (32)
DN150 (16)

H3 (ID=0.8/OD=1.0) (221)
HSF0 (ID=0.8/OD=1.6) (225)
HSF2 (ID=0.8/OD=1.6) (460)
HSF3 (ID=0.8/OD=0.8) (459)

Clamp ends (15)
Seal (119)
TriClamp and Weld (54)
Weld and Thread (82)
Weld ends (1132)

LOOKING FOR A PARTICULAR PRODUCT? NEED HELP PLACING AN ORDER?

As Alfa Laval master distributor, KIEPE Electric has access to the full range of Alfa Laval products.
Our experts are ready to assist you with product selection. Just contact us!

#block-template--16748091015421__4844aaba-33d8-49f8-9679-27fb2e9543d0-168448409143cc5dc9-0 .promo-block__image-wrapper { background-image: url(//shop.kiepe-electric.com/cdn/shop/files/Transparent_background_800x520px_800x.png?v=1731492201); }

Recover password

Hygienic fittings DIN EN 10357-A

Alfa Laval Hygienic fittings DIN EN 10357-A range includes:

O-rings DIN EN 10357-A material:

KIEPE Electric SpA